TIME ATTACK LOTUS EXIGE S2

Standard Specifications

Below are the vehicle specifications in standard tune. For obvious reasons, the team cannot publish the specifications of the vehicle post development.

Engine

1796 cc I-4, Toyota 2ZZ-GE Engine, DOHC with VVTL-i
Bore/Stroke 82 mm/85 mm
190 hp (142 kW) @ 7800 rpm
133 ft·lbf (187 N·m) @ 6800 rpm
Compression ratio: 11.5:1

Transmission

C64 manual transaxle, aluminium lightweight construction.
6-speed, close ratio, constant mesh helical gears and open differential & single plate dry clutch.

Chassis

Lotus designed lightweight structure of epoxy bonded aluminium alloy extrusions with glass-fibre composite front section, extruded aluminium door beams, integral steel seat-belt support structure and lightweight galvanised steel rear subframe.

Suspension

Fully independent suspension utilising unequal length wishbones.
Bilstein mono-tube dampers with coaxial Eibach coil springs.
Front anti-roll bar.

Wheels and Tyres

8-spoke lightweight alloy wheels in black
F: 6.5Jx16 & R: 7.5Jx17

Brakes

Servo-assisted, 4-channel Anti-lock Braking System (ABS) with AP-Racing twin-piston fixed aluminium alloy front brake callipers.
Brembo single-piston sliding rear callipers and 288 mm diameter, 26 mm thick front and rear cast-iron ventilated & cross-drilled discs.

Performance

0-60 mph (0-97 km/h): 4.7 seconds
0-100 mph (0-161 km/h): 12.9 seconds
Top speed 147 mph (237 km/h)

Dimensions

Wheelbase 2300mm
Track F:1457mm R: 1506mm
Length 3785mm
Width 1719mm
Height 1163mm
Overhang F: 805mm R: 692mm
Ground Clearance 130mm
Vehicle Mass 875kg
Weight Distribution F: 38% R: 62%

<<<INTRODUCTION MODIFICATIONS>>>